Explore our latest builds, tips, and adventures.
Experience the luxury and ambiance of a high-end vehicle in your Tacoma.
The VLEDS Dual Output Footwell Kit transforms your driving experience by adding both comfort and enhanced safety with its sophisticated and modern lighting.
Effortless Installation with New OEM-Style Harness: Forget splicing and tapping! We've partnered with Redside Electric to bring you a redesigned, easier-to-install OEM-style breakout harness. This innovative harness seamlessly integrates between your factory harness and the overhead panel assembly, enabling parallel functionality and connecting the footwell lights with your factory overhead light switch.
Dual Functionality for Ultimate Convenience: COURTESY Mode - Open your door and be greeted by a vibrant, full-output light (200LM per side). The lights gracefully fade out in sync with your map and dome lights, creating a welcoming and sophisticated atmosphere.
AMBIENT Mode - Enhance your nighttime driving experience with a soft, inviting ambient light. Factory set at approximately 10LM, this subtle glow adds a sense of spaciousness to your cabin. Want more light? Easily adjust the brightness to your preferred level with the included screwdriver.
Uncompromising Quality and Performance: These aren't your typical cheap strip lights! Our striplight bars are compact yet incredibly powerful, delivering a significant amount of light in a small package. Forget flimsy plastic and fiberglass. We use:
Aluminum Metal Core PCBs: For superior heat dissipation and longevity.
CNC'd Aluminum Body: Precision-engineered for exceptional durability and a premium look.
High-Quality Exterior-Grade Black Anodizing: Ensuring long-lasting protection and a sleek, modern finish.
Included:
✔ 1X - Switched OEM-style Harness by Redside Electric
✔ 2X - LED Bar Lights
✔ 2X - LSE VHB Tape for Smooth Surfaces
✔ 1X - VLEDS High/Low PWM Dimmer
✔ 1X - Dimmer LSE Mounting Tape
✔ 1X - PWM Adjustment Screwdriver
✔ 1X - 4 Foot Wire Extension
✔ 8X - Small Zip Ties
Complete Your Footwell Lighting with Rear Seat! Extend the experience to your rear passengers with our easy-to-install Rear Seat Light!
This plug-and-play system connects directly to the output connector on your passenger-side front footwell light bar, making installation a breeze. In just minutes, you can illuminate the rear footwell and elevate the interior of your vehicle.
Daisy Chain Design for Ultimate Customization: Our clever daisy chain wiring design allows you to connect multiple light bars on a single circuit. Add one, two, or even more – the choice is yours! Customize the brightness and coverage in your rear seating area to achieve your perfect interior lighting.
Ultra-Slim, Low Profile Design: Measuring just under 3" long and a mere 1/4" thick, these discreet light bars blend seamlessly into any vehicle interior. Their low-profile design ensures they can be mounted virtually.
Included:
✔ 2X - 21 LED Bar Lights
✔ 1X - LSE VHB Tape for Smooth Surfaces
✔ 1X - Velcro Tape for Carpet
✔ 2X - 8 Foot Extension Wires
✔ 1X - 4 Foot Extension Wire
✔ 4X - Zip Ties
Fitment: 2016-2023 Toyota Tacoma
Installation Guide:
Installation Instructions Here
Front:
Plug-N-Play OEM type breakout harness (installs above overhead switch panel).
Beautifully CNC'd all-aluminum body striplight bar with satin black anodized finish.
Built-in current limiting resistor and diode protect the strip from reversed polarity installation.
Connections Over-molded 2-pin connectors for easier installation and better reliability.
Super-strong LSE 3M double-sided tape for mounting.
Proprietary 3014 chips mounted on an aluminum PCB that match all VLEDS LED bulbs.
Rear:
Plug-and-Play daisy chains off the passenger side light bar
Made with a thick aluminum circuit board for better reliability and a longer lifespan.
Black PCB and aluminum housings add a nice touch and blend better with most interior panels.
High-quality 3M VHB tape or Velcro. Just clean and prep any smooth or carpeted surface, peel and stick the strip light to install.
Built-in current limiting resistor and diode protect the strip from reversed polarity installation. If they don't light, flip the wires around.
No stripping or fussing with wires! Simply daisy chain them together using wire adapters and extensions. DuoTaps are recommended for hardwire installations.
Color-specific chips that match all other VLEDS LED bulbs.
Output (Each): 400LM TOTAL
Current Draw @ 14.4V: 0.5A
Operating Voltage: 12-18V
Light Source : 3014 Proprietary Chip
Driver Style: Resistors
➜ 60 Day Returns: You have 60 days from the original receipt date to return any new, unused items for a refund. If an item has been heavily used or damaged, the product will not be eligible for return or a refund. Before installing any products, verify fitment to ensure that items are not damaged during installation in a vehicle that they don't fit in.
➜ Exchanges: If you need to exchange an item, place a new order for the correct item and return the original using our standard return process, as stated in the previous paragraph. Exchanges are treated as a return; there is no need to wait for the return to be completed before placing a new order. Once we receive your returned product, we will refund your original purchase minus the shipping fee.
➜ Return shipping costs: The customer is responsible for all return shipping costs. There are no exclusions to this policy. For domestic customers only, a pre-paid return label is available for purchase. A link will be provided in your RMA email. Packages with insufficient postage will be refused. We will email you a return label if we made a mistake.
➜ 3-Year-Limited-Warranty: VLEDS warrants that it will provide a free replacement for any VLEDS product that fails or proves defective during the warranty period beginning the original date of purchase and on the vehicle for which it was originally installed. This warranty does not apply to a VLEDS product that has been altered, misused, damaged, installed improperly, or installed on a vehicle for which it was not designed. On commercial/fleet vehicles, all VLEDS products are covered for up to 1/2 of the standard warranty period. Additional conditions may apply to certain part applications; if they do, they are clearly stated on the product page description. This warranty is extended only to the owner of the vehicle on which the VLEDS product was installed, while that person owns the vehicle, and is not transferable.