2016-2023 Toyota Tacoma Plug & Play Remote Start Kit [H-Key] | MANUAL

Plug & Play. No dealer activation required!

You will be able to get into the vehicle after a remote start, put the key into the ignition, turn the ignition two clicks to ON position, tap the brake pedal, and now your key is in control and you can drive off!

Operation:
To Start: Press the lock button 3 times on factory key FOB.
To Stop: Press the lock button 3 more times while engine is on.
Parking Lights will illuminate.
Run Time is 15 minutes.
All doors, and hood must be closed.
Vehicle must be put into "Ready Mode" by Putting foot on Brake pedal, Shifter into Neutral, E-Brake up, Foot off Brake pedal, Turn ignition off, open the door, exit the vehicle, close the door and lock. Opening up any door after this will take the vehicle out of ready mode.

Included:
✔ Complete Kit
✔ Printed color instructions
✔ All Wire and Hardware Interfacing

Fitment:
✔ 2016-2023 Toyota Tacoma
✔ Compatible with our Long Range Remote Kits
✔ Compatible with our Smart Phone Module

Please Note:
➜ Manual Transmission ONLY
➜ Vehicle will NOT shut off when a door is opened
➜ You will also need to tap (NOT CUT) your Clutch Cancel wire
➜ If your Vehicle has a TPMS system (non-Canadian models), you will need to cut one wire, TPMS will still function. If you have a 2020-2023, this wire, depending on build date, will be light pink instead of light green. Location of this wire though IS STILL THE SAME REGARDLESS

Warranty

All products sold by N2 Designs, Inc. are covered under our Standard Warranty for a period of 1 year from the date of purchase. N2 Designs, Inc. warrants the product to be free from defects in workmanship and materials for the warranty period. If the product fails during normal and proper use within the warranty period, N2 Designs, Inc. will replace the defective parts of the product, or the product itself, with new or reconditioned parts or products that are functionally equivalent or superior to those originally supplied, by way of a provided RMA from the original manufacturer or supplier from which the product originates. Our Standard Warranty does not cover misuse, improper installation, or abuse of the product. Products that have been damaged, modified, or tampered with are not eligible for warranty coverage unless the modification was specified by our Technical Support Team. All Warranty claims are handled on a case by case basis.